Silicone Rubber Seal Ring Low Friction O Rings Multi Color Customized Sealing Rings
The specifications of the standard material
| Silicone Rubber For Food Use |
| Type | Appearance | Density (g/cm3) | Hardness (Shore A Point) | Tensile Strength (MPa) | Elongation at Breakage (%≥) | Tension Set)%≤) | Tear Strength (kN/m≥) |
| NE-631 | milky-white, translucent, no obvious extraneous matter | 1.08±0.05 | 30±2 | 5.5 | 500 | 5 | 14 |
| NE-641 | 1.13±0.05 | 40±2 | 6.5 | 400 | 5 | 16* |
| NE-651 | 1.15±0.05 | 50±2 | 8.0 | 320 | 6 | 20 |
| NE-661 | 1.19±0.05 | 60±2 | 8.0 | 300 | 6 | 20 |
| NE-671 | 1.22±0.05 | 70±2 | 7.5 | 220 | 5 | 18 |
| NE-681 | 1.25±0.05 | 80±2 | 7.0 | 180 | 5 | 18 |
| General Silicone Rubber for Molding |
| Type | Appearance | Density (g/cm3) | Hardness (Shore A Point) | Tensile Strength (MPa) | Elongation at Breakage (%≥) | Tension Set)%≤) | Tear Strength (kN/m≥) |
| NE-5130 | milky-white, translucent, no obvious extraneous matter | 1.09±0.05 | 30±2 | 5.0 | 440 | 8 | 15 |
| NE-5140 | 1.13±0.05 | 40±2 | 6.0 | 380 | 9 | 16* |
| NE-5150 | 1.15±0.05 | 50±2 | 7.0 | 320 | 10 | 18 |
| NE-5160 | 1.18±0.05 | 60±2 | 7.0 | 280 | 10 | 18 |
| NE-5170 | 1.21±0.05 | 70±2 | 6.5 | 200 | 9 | 16 |
| NE-5180 | 1.25±0.05 | 80±2 | 6.0 | 150 | 8 | 15 |
Production Feature
Rubber O-Rings are a loop of elastomer with a round cross-section intended to be seated in a groove and squeezed together during assembling between two or more parts creating a seal at the interface to block the passage of liquids or gases. O-Rings selection is based on chemical compatibility, service temperature, sealing pressure, lubrication requirements, and working atmosphere. O-rings can form a static or dynamic seal. A static seal is where the O-ring does not move and is used simply for containing pressure or maintaining a vacuum. Dynamic seals can be reciprocating (like a piston and cylinder), or rotating (shaft rotating in a housing). Axial squeeze and radial squeeze are two methods for applying an O-ring.
| Industry | Food & Beverage, Home Appliance, Electronics, Automotive, Consumer Goods, Medical and health |
| Application | Rice Cooker, Induction Cooker, Pressure Cooker, Water Heater, Vacuum Cleaner, Juicer, Lid Gasket, Kettle, Thermos Bottle, Thermos Cup, Irons, Microwaves, Water dispensers, oven, magnetized cup, coffee pot, medicine box, etc. |
| Advantage | - Excellent sealing performance,
- Waterproof,
- Leak proof,
- Good preservation effect,
- Completely non-toxic and odorless,
- Can be heated at high temperature without deformation and generating harmful substances,
- Good tensile resistance, specially inspected and tested,
- Long term use without fading,
- Corona resistance,
- Arc resistance,
- High and low temperature resistance,
- Good aging resistance,
- Machine Oil-resistant
|
| Disadvantage | - Poor mechanical properties in terms of tensile strength and tear strength. Usually, only static sealing is used.
- Silicone rubber has excellent acid and alkali resistance, but has little resistance to alkane and aromatic oils. So it is not suitable to use in environments with work pressure exceeding 50 pounds.
- relatively high manufacturing cost.
|
Order Processing
1. First, send the Inquiry with 3D drawing or sample to us, and tell us the hardness and Tensile strength required, as more detaill as better.
2. We will analysis the inquiry, and offer the quotation.
3. Buyers accept the quotation, confirm the trial order of sampling, and make payment.
4. We will do sampleing and test, and send the sample or test report to customer.
5. Sample confirmed, buyers place the bulk order.
6. We send the official PI for confirmation.
7. Buyers make the payment, and send the payment proof to us.
8. After the payment received, we will arrange the production.
9. We will notice the buyers when products is about to ready, and book the inspection time with customers, or we show pictures for confirmation.
10. As soon as the inspection passed, we will arrange delivery according to the items we both agreed with the buyers.easy FYI
Inquiry (3D drawing or sample) ► Analysis & Quotation ► Trial Order & Payment ► Sampling & Test ►Sample Confirmation ► Bulk Order ► PI Confirmation ► Payment ► Production ► Inspection ► Delivery
Production Processing
1. If we have stock of material, we would start production soon, say 5days. While if material out of stock, we might take about 25days more to resere the material.
2. Make Modeling according to the project, and match the colors as per the confirmed order.
3. Mix the silicone rubber,
4. Shapping and Vulcanization.
5. The quality control team(QC) test the hardness and tensile strength, they will give inspection along the whole production line.
6. When the products ready, the workers will do triming.
7. We will print the customed logo if required.
8. QC and clean before packing.
9. Packing, Usually, PE inside , Carton Outside, Carons on pallets if needed.
10. Products be transfered to the warehouse.
Material ► Color Matching ► Mixing ► Shapping & Vulcanization ►
QC ► Triming ► Logo Customize ► QC & Packing ► Warehousing
About Lan Anh Silicone
Lan Anh Silicone offers engineering services from initial part analysis to final delivery. With an onsite tool shop, we can provide prototypes quickly and economically. From your drawing, 3D model or sample parts, our engineers can review the manufacturability of the part and recommend changes that will reduce costs without compromising performance. Our research and development (R&D) laboratory can recommend materials suited for your application and offer testing methods and services you may need to prove performance characteristics.
Our Mission: To be a contributor to the environmental movement and the improvement of living standards.
Our Vision: To be the pioneer of silicone products in the Asia-Pacific region.
Our core values: provide employees with the most comfortable working environment, fulfill corporate responsibilities, meet customer needs and build a high-quality, professional team.
Our business philosophy: sincerity and pragmatism, gratitude and return, equality and mutual benefit.
Certificates
|
|
Silicone Rubber Seal Ring Low Friction O Rings Multi Color Customized Sealing Rings Images
|
